1. Dan - Avatar

    Dan says:June 14, 2018 at 06:13

    don't you know that the white wire (neutral) and the green wire (ground) are electrically the SAME? they go to the same spot in the panel. put an ohm meter from green to white.... ZERO! ohms.
    I'm trying real hard not to call you an idiot.....
  2. Hitman - Avatar

    Hitman says:June 17, 2018 at 10:31

    Hi Dan,
    The only reason he is using the green wire is because he's got no ground on hand, but if you drive a copper pipe into the ground at least 6 feet then use it as your green wire you will see actual power coming from the ground :)

    Hope this helped you to understand.

    Regards Hitman

Leave your comment

Enter the verification code to post your comment: